Hi
I've installed SSR2013 on a W2k8 R2 x64 Server and am trying to deploy the agent out to various other servers
of the same kind. This deployment is taking on average - 16 minutes!!!!! Longer than it takes to install the full blown
product? Is this normal? Can I speed it up?
Thanks
Cindy
Hallo.
Ich bin auf der Suche nach einer günstigen und legalen Weg den folgenden Prozess für eine Firma abzubilden:
Für ein Linux System (evtl später auf Windows mit re-imaging rights) wird ein HD Abbild erstellt, welches auf die HD von weiteren produzierten Geräten repliziert 1:1 übertragen werden muss. Die Zielhardware ist überall gleich.
Dies beinhaltet die eigene in-house Produktion also auch System HDD Updates in form von "Recovery only DVD", welche von Service Technikern bei Kunden aufgespielt wird.
Das Hd-Image creation & recovery Programm soll möglichst einfach sein, wie Ghost 15. Ich bin mir allerdings nicht sicher ob Ghost 15 für "Recovery only" herausgegeben darf.
Diverse freie Clonig Tools auf Linux Basis wäre hier zwar auch eine Lösung, bevorzuge jedoch eine kommerzielle Lösung.
Welche Produkte können Sie hierzu anbieten?
Today, Zip file corruption problem has built ordinary things for users because network failed, virus attack, electricity fluctuate, improper download or upload file and unknown compression techniques are major issues behind Zip file corrupt or damage. But we have infrequent or well qualified Zip repair tool for resolving all corruption issues of Zip files. By which this Zip file recovery software you can easy to obtain all corrupt Zip files.
I use SSR to backup a number of servers. I do a full recovery point set on weekends and then incrementals daily. My onsite backup destination is able to hold 4 recovery point sets. I want to be able to just copy the most recent recovery point set to store offsite. Is there a way to do this within SSR without getting all 4 sets. The Offsite copy option looks like it would try to copy all 4 sets. For offsite DR only the most recent set is important to me.
i had a failure of a windows sbs 2008 server and could not migrate it over to a new server . instead i clean installed on a new server with sbs 2011 standard but failed to have a couple users save there my documents in the redirected folders and the email contacts and calenders
i have backups of the failed server including exchange in SSR 2011 for small business server edition with granular restore. i can mount the two mail stores i have in the exchange tab but just see email no contacts - where do i find them
when i find the folder redirections the folders are empty - is the information hidden somewhere else
I would like to establish a backup schedule that will backup to external hard drive 'A' daily for week one. Then for week two, backup to external hard drive 'B'.
For week three, go back to external hard drive 'A', for week four external hard drive 'B', etc. etc. etc.
Thanx,
GeorgeK
Trying to schedule a backup of system drive c on a regulary basis.
C contains win8 x64 uefi install. C is located on a SSD. On the same SSD there are also hidden partitions.
Partitionlayout: 300MB Win8 recovery partition, 100 MB Fat32 EFI Systempartition, C-Drive
In Diskmanager it is not possible to assign a drive letter to the recovery or EFI partition.
In SSR2013 i define a volume backup of drive C. In the next screen SSR2013 recommends to add also to this backup the other two partitions. (Regarding the physical partition layout the SSR2013 list of partitions are ordered by size? (1. Efi, 2. Recovery partition))
This seems to be correct.
I hit continue.
Now the next screen shows the recovery type: It is not possible to create a set! It is only possible to create an independent backup!
A Message tells me that i can't create a set because of a hidden partition which has no Driveletter assigned.
If i deselct the EFI-Partition and only the recovery partition and the C-partition is selected i can create a backup set - so the problem is the Efi-partition. I deselect the Efi-partition select the other parameters -do initial backup - no problem at all. The hidden recovery partition and drive c was backuped.
Now i changed the backup definition and added the Efi-Partition - which is accepted. Also the Drives are shown correct: Recovery (*:\);(*:\);System (C:\).
I now do again a backup - a new full backup is done - but without the Efi-Partition.
I tried then to define a backup from the Efi-Partition only. SSR2013 is asking me if i want do add this backup to an already definded backup - i select yes, selected the C-Drive backup - which is accepted. Doing a backup will not safe the Efi-Partition.
I defined now a new backup from the efi partition allone, not adding to the other backup. I can't create a backup-set on regulary basis - so i chose an independent backup. I started the backup manually - voila: Efi-Partition was saved.
Question: How do i do a backup of a full harddrive with all partitions on it on a regulary basis? (Like SSR2013 is recommending it) and other solutions are doing it?
Thanks
Thorsten
Just installed SSR 2013 on a Win2003 server.
Tried to run liveupdate & got error
LU1814: LiveUpdate could not retrieve the catalog file of available Symantec product and component updates. Please verify that you are able to connect to the Internet and run LiveUpdate again.
However, I am connected to internet and am able to ping liveupdate.symantecliveupdate.com which appears to be the URL that is trying to be contacted.
Side note: LiveUpdate from Endpoint Protection works fine.
Help, please.
GeorgeK
I am missing one of the incremental files. It is file Drive_20_i024.iv2i. There are 41 files. Is there any way to open any of the files between 25-41? I do not know where this file is. I back up the files on an offsite drive and I cannot find it there either. Is there any way to bridge this gap?
Well, for some days I run SSR 2011 on Win7-64, all fine, but yesterday I attached my ESATA drive – an it is not displayed in SSR. I wanted to use it as Offsite drive an I only attach it a few times in a month. I can See it in Explorer, I can use it as a backup target, but I cant use it as offsite drive because ist is not recognized. I deleted the Folder VproRecovery – without any sucees. I Changed the Drive Letter – same. I can also attach the Drive via USB – same. How can i manage to get this drive to appear in SSR2011? (on another partition, I run BESR8.0 on WinXP, here also the drive doesn't appear. But i remember it did appear there, months ago when I used it last) .
Any Idea what to do?
Nice REgards
Ralph
Hello,
I saw this thread http://www.symantec.com/connect/forums/where-do-i-find-jobid
And
I'm interresting by vbs script like CreateIncrementalImage.vbs
Where i can download it please ?
There is a script for full image ?
Bests regards
Hi,
When i load a recovery point from a Exchange 2007 server incremental backup in Granular Restore, it keeps saying 'Loading Recovery Point' in the lower left corner and i am left with a blank GRO screen.
When i open a Windows Explorer session, I see that GRO is mounting my disk, but after 1 or 2 seconds it is dismounting that disc. It does this for some time. It then goes to the next disk and the same procedure starts again. It does this for all 3 disks I have in the Recovery Point. After the last disk, it goes back to the first disk and all starts over again.
I can succesfully open and mount the recovery disks in the Recovery Point Browser, but I must use GRO because I need to recover some email items.
The backup is password protected. I'm not recieving any error messages. My server is running on Windows Server 2008 R2 x64. Outlook 2010 is installed.
Could some please explain what is going on with GRO?
many thanks in advance.
I created a backup image of the D: drive on my server 19 days ago. Then I did another backup for the D drive 8 hours ago. I think that it only backed up what had changed on the D: drive because the image is much smaller.
We are putting larger drives in for the second array. Currently I am doing a recovery using the backup image from 19 days ago. How do I do the second recovery from 8 hours ago to just update the files that were changed??
Hope this makes sense.
Am doing this right now so any assistance would be appreciated.
Thanks
Cathy
Hi - I'm in a situation where I have to backup about 3TB of storage to external HDs. I have two 2TB drives attached to the machine, is there a way to use both of them for recovery point storage? Since they're USB, I can't convert to dynamic and extend volumes, and I honestly don't know if that works with SSR or is even safe to do.
Thoughts?
We have a brand new Windows 8 Laptop we have just installed System Recovery 2013 on and it is not seeing the internal hard drive or the external drives when we go to do a disaster recovery backup. Windows sees the internal drives and external drives just fine. The internal drive is a 500 Gig Hard Drive. The external drive is a western digitial 3TB Mybook. When you go into the create a backup of my machine all we see is a system reserved partition on 2TB. Not sure where it is getting that. That drive only shows up if you check the show hidden drives box. The laptop is set to boot EUFI. According to my research System recovery 2013 is supposed to support that but I am posting just in case. Thank you.
Hi Experts,
I have a DC being backedup using SSR 2013,The C drive being backed up is allocated 120GB,wherein only 20 GB is used space .I have a backup job running successfully using SSR.I need to restore this server in my vmware environment.I tried to assign a Harddisk space of 30GB in new virtual machine and started the restore process.The recovery my computer wizard ends with invalid disk.Is there anyone here who can guide me with the minimum disk requirements for the restore process.
Thanks in advance
Buenas gente mi pregunta es la siguiente:
Usando Norton Ghost 15 puedo crear una copia de seguridad de mi unidad SSD que usa como OS Windows 8??
muchas gracias!
I had the following issue/case in SSR2011. Not fixed in SSR2011. Symantec fixed in SSR2013
Case 600-781-163 Event triggers cause machine to hang. Eventually the machine would run out of resources and hang. Finally fixed in SSR2013.
Problem using SSR 2011 when I configure the Event Triggers, under the General tab, "Any application is installed or uninstalled" the "handle count" as seen in the task manager increments until the machine locks up.
Hi,
I'm using SSR2011 and on one machine with ESATA-Drive SSR2011 does not show any drive that can be backed up.
According to http://www.symantec.com/business/support/index?pag... I would like to remove the extended partition, but in Windows Disk Management no extended partition is shown.
Any idea how to fix this problem?
Thx
Update:
Removed extended partition with Partition Manager. But still no drives to backup. :-(
I'm trying to recover a win2k8 machine using SSR2013. I boot from the x64 recovery disk, set up the network and am able
to ping other machines. I then try to map to my EMC VNXe3100 Network Storage device where my images reside.
The EMC storage device is in a domain.
I select
Folder : \\machinename\share
then select "Connect using a different user name"
Username: domain\username
Password: xxxxx
I get an error popup saying "An extended error has occured"
I am able to ping the EMC device so I have network connectivity.
I am able to map to the same EMC device using a running Win2k8 server machine which is not in the domain
by using the same domain\username and password as I use when trying to map from SSR2013. I am also able to
map to the same EMC device using the SSR2011 Recovery Disk.